Horizontal mixers
Side- and bottom mounted agitators
Series-made agitators with heavy positioning. As standard built with single mechanical shaft sealing for up to 5 bar pressure.
The agitators can be mounted horizontally and at angles up to 45º. In certain situations, up to vertical installation can be carried out. However, the shaft sealing must always be below liquid level during operation.
Aseptic Edition
Special version with double mechanical shaft seal. This agitator is specially designed for: contamination-free environments, sterilization requirements on both sides of product contact surfaces and for abrasive products.
The agitator must be externally liquid lubricated during operation. This could be with steam condensate, for example.
Datasheet
| Materiale | Rustfrit stål AISI 316 |
|---|---|
| Maling (Motor) | Blå Ral 5019 |
| Finish | Ra<1,0 |
Røreværkstyper
| Type | SM.132M6-FT40.39 | SM.112M6-FT30.29 | SM.112M12-FT30.29 | SM.71G4-HOJ.FT20.19 |
|---|---|---|---|---|
| Motoreffekt kW | 4,00 | 2,20 | 0,75 | 0,75 |
| Hastighed O/min | 950 | 950 | 500 | 1400 |
| Pumpeeffekt M3/time | 1000 | 600 | 600 | 200 |
| Vægt Kg | 75 | 50 | 50 | 20 |
| Akseldiameter mm | 39 | 29 | 29 | 19 |
| Aksellængde mm | 600 | 500 | 500 | 400 |
| Røreværkslængde mm | 1025 | 865 | 865 | 635 |
| Propeltype | Marine | Marine | Flow | Marine |
| Antal blade | 4 | 3 | 3 | 3 |
| Propeldiameter | 270 | 255 | 305 | 140 |
Flangetyper
| Flange type | - | A | B | C | D |
|---|---|---|---|---|---|
| Flangediameter mm | P | 325 | 300 | 200 | 160 |
| O ring mm | O | 260 | 232 | 110 | 110 |
| Bolte Delecirkel mm | DC | 295 | 265 | 165 | 130 |
| Bolte | - | 8XØ14(M12) | 8XØ14(M12) | 4XØ11(M10) | 4XØ9(M8) |
| Flangetykkelse mm | R | 23 80 | 23/35* | 35 | 35 |
| Gennemføring Min mm | - | 258 | 80 | 60 | 50 |
| Gennemføring Max mm | - | 230 | 108 | 108 |
* SM.132M6.FT40.39 = 35 mm
Akseltætning
| Type | Materiale |
|---|---|
| M | Sic/sic |
| H | Carbon/sic |